VIBROMET
DESIGNED FOR AUTOMATIC MACHINES
VibroMet is a system for collecting data from triaxial vibrational sensors, data processing, aimed at predictive maintenance.
VIBRATION SENSOR
CHARACTERISTICS OF THE SENSOR
- STAINLESS STEEL BOX AISI 316 L M18
- PRE-WIRED CABLES
- IP67 SEALING GRADE IP67
- RANGE T° -25° -+ 70°
ANALIYSIS
In addition to analyzing the accelerations, it is possible to select the control of the produced frequencies (FFT), setting the amplitude and frequency limits for each single axis.
SELF-LEARNING
Thanks to self-learning, VibroMet can be applied on any machinery, since the system MEMORIZES THE ENERGY LEVELS in correct working conditions using them as the basis of the analysis.
– The ALARM input is displayed simply by the operator, using a monitor that follows the sensor status. In addition to the local signaling it is possible to send Email to the operators.
FEEDING AND CONFIGURATION
The sensors can interact with the control systems of the machines themselves, typically the PLC
The VIBROMET system provides a set of APIs that allows the machine control system to activate one or more sensors, also indicating the unique name of a specific production activity (typically referred to as a “recipe”).
HOW DOES IT WORK :
WHERE TO USE IT:
Some examples :
- Sprayers and atomizers
- Mixers and agitators
- Mixers and agitators
- Grinding systems
- Press
- Packaging lines
Some examples :
- Steel Mill
- Dosing systems
- Purification systems
- Kiln
- Food lines
- Process plants
Some examples :
- Railway bridge
- Highway bridge
- Naval control room
- Hydroelectric turbine
- Transformers
- Escalator
FOR WHAT ANALYSIS DO YOU USE ?
ACCELEROMETERS : For vibrational analysis to obtain the dispersed energy from the components of a mechanical element.
The VIBROMET system allows the periodic acquisition of the vibrations of a machine from which it is possible to calculate the tendency of each group harmonic over time, trying to predict its development.
PREDICTIVE MAINTENANCE
Predictive maintenance aims to assess the state of a plant and its components in order to predict failures and prevent possible negative effects:
- PRODUCTION STOPS
- QUALITY PROBLEMS
- SIDE EFFECTS OF THE BREAKAGE ON REMAINING COMPONENTS
THE APPLICATION OF PREDICTIVE TECHNIQUES REQUIRES THE AVAILABILITY OF ONE CONSIDERABLE QUANTITY OF DATA.
CURRENT SYSTEMS VS VIBROMET
– Many machines or plants do not provide data or are not easily accessible or integrated.
– In the event that the data are available, they often do not appear to be “the right ones”.
– The obsolescence cycle of an industrial machine / plant is definitely longer than the cycle of obsolescence of the analysis systems and the types of productive application
THEREFORE THE DATA ACQUISITION REQUIRES THE USE OF DEDICATED SENSORS OR INSTRUMENTS